1. Glass cleaning: First, use the gross inspection to stain diluted
glass water solution, evenly smear the glass from top to bottom, and
then use the glass scraper to scrape clean from top to bottom, then use
dry towel to clean the water marks left on the frame household, and wipe
the water marks on the glass with machine skin.
2. Toilet cleaning: wipe the toilet with wet towel and cleaner from top
to bottom in an all-round way, focusing on dealing with dead corners,
sanitary ware and stainless steel pipe fittings left behind by waste
cleaning, and then wipe them with dry towel in an all-round way.
3. Clean kitchen: wipe all-round with wet towel again, focusing on the
ground and corner, Kitchenware and various stainless steel pipe
fittings, then repeat with dry towel, and wipe all kinds of stainless
steel pipe fittings with stainless steel maintenance fluid.
4. Bedroom and hall cleaning: Clean the dust on the wall with chicken
feather duster, wipe the switch box, air outlet, air conditioning
outlet, smoke exhaust and so on.
5. Cleaning of doors and frames: fold towels into blocks, wipe them from
top to bottom, remove glue spots and other stains, wipe doorframes,
corners and other areas easily overlooked by the road, wipe them
thoroughly and spray private wax on them.
6、 地面清洗：着重处理开荒保洁遗留下的漆点、框格护坡模具 箱体护坡模具 华尔街铜牛 电阻柜 接地电阻柜 电缆保护接地箱 隔离墩模具 化粪池模具胶点等污渍，然后用清洗机对地面进行清洗。
6. Ground cleaning: Focus on the treatment of paint spots, adhesive
spots and other stains left behind by cleaning, and then use a cleaning
machine to clean the ground.
7. Keeping the corners clean: wipe with a wet towel, focus on the paint
spots that have not been cleaned off, then wipe with a dry towel and
spray furniture wax on different materials.